|
Missouri | On page 1 of the Kinze VT screen, in the middle row of buttons, there are three buttons. I forget the name, for certain, but it is the furthest one to the right. It is either the "settings" or "config" button. You press that button, which brings up the planter configuration screen. You choose your planter model, and all the options on your planter (2 pt hitch, ASD, pneumatic down, etc). If the planter has already been setup, and setup correctly, you won't have to change anything while going through this, every choice defaults to the settings entered the last time the configuration wizard was run, so all you really have to do when doing this for a second time is press the page forward button to cycle through each page until the end. It will not be necessary to re-learn the sensors. | |
|
Kinze ISO
