roaming | Bob MI - 5/9/2013 19:43
I have got field file size too large or something like that.
The error is probably "Map memory exceeded". This means that the onscreen map is full, and usually only happens in very large fields. Data is still being recorded to the USB stick, but the map you see on the screen won't show the new data. To fix this, you can change Fields or create a new Operation Instance.
Bob MI - 5/9/2013 19:43
What the heck is op instance?
An Operation Instance is usually used to perform the same operation multiple times in the same Field in the same year. Like spraying, baling, replanting, etc. It clears your map and your acre counter.
Bob MI - 5/9/2013 19:43
It wont let me create a new field either says work in progress. Cant find anyplace to address these issues. Didnt even know I was creating a file.
The display is designed to record data when you're working. "Working" is basically any time you have ground speed and your implement is down. You didn't say what implement you're using or what tractor you're running, but if you stop moving and raise your implement, you should be able to change Fields.
Bob MI - 5/9/2013 19:43
BTW any progress on liquid section control for CIH pulltype sprayers?
Yes, this is available now with AccuControl liquid. |
pro 700 error message
