Posted 5/6/2013 21:58 (#3084378 - in reply to #3084328) Subject: Re: Measuring water for sprayer - getting tired of guessing and being low
We have a 2" Banjo flowmeter that is set up on cam lock fittings as well. I mount it just after the shut off valve at the transfer pump. That way I can see how much I'm putting into the sprayer tank. It's usually fairly accurate but if you happen to cavitate the pump for some reason it will throw the meter off. Banjo says you need to have 16" of straight flow in front of & out of the meter for it to be accurate. They also want you to use hose that has a smooth inside wall.
Measuring water for sprayer - getting tired of guessing and being low
