|
| Find Out what version of firmware you are running on your Nav. I had several MT 800 series machines, where the Sonalert didn't work at all. This was a firmware problem on some CAN based platforms and was fixed with the release of version 5.16, as below.
Version 5.16
Compatibility
Product Version
FmX 5.11
EZ-Guide 500 5.10
CFX-750 1.06
AgGPS 262 2.0
AgGPS 252/332 3.7
AgGPS 4x2 3.67
AgGPS 542 4.19
Changes since v5.15
New support:
* Support of 542 receiver
Platform Specific Changes:
* MacDon Swather support
Problems Addressed:
* Enable JD manual override adjustment slider on display
* Corrected Fendt issue with automatic manual override being detected
* Updated CNH CCM vehicles for center voltage change for calibration
* Improved radio communication loss on GPS reconfig
* Fixed issue with End of Row warning on Massey and CAN based vehicles intermittent <<<<<<<<<<<<<<<<<<<<< (mine weren't intermittent)
* Ignore DGPS config options from standalone GPS receivers
* FmX support of classic autopilot (standalone reciever) resolves loss of communication
| |
|
FM1000 autopilot engage alert
