|
| You can install a hydraulic flow-control value box in your hydraulic hose lines to regulate the flow to the hydraulic motor. I have this setup for a sprayer.
As John mentioned the best route if you will using more than one hydraulic function while the hydraulic motor requires flow is to install the pto pump.
I only operate the hydraulic motor. I do not know if I wanted to raise a lower other hydraulic cylinders with another remote if this would cause the flow to the hydraulic motor to slow down or not remain at a steady flow. Maybe installing flow restricters in the other hydraulic cylinder lines would give the easiest flow to the hydraulic motor so that remote would always have plenty of oil flow. | |
|
Open or Closed Center Hyd.
