|
Minnesota | Angle per turn and online agressiveness are the two settings that I would be adjusting to get the weaving pattern out. I would also chek and double check your antenna measurements, make sure that you you have your antenna set forward of the fixed axle and not behind. Was on a service call last spring where the only thing I did was switch the antenna location and everything started working great.
on a side note, I have always been able to put the antenna on top of the cab, and with the correct angle per turn and aggressiveness have been able to get machines steering correctly.
Edited by IH1486 4/27/2013 21:41
| |
|
Another EZ Steer "wandering" question
