|
Floyd County, Iowa | I've got an EZ Guide 250, and EZ Steer 500 (WASS). I've got the antenna on the nose, where it worked well. I had the T2 controller mounted with leads pointing down, but was advised to move it to horizontal with leads pointing forward, which I did yesterday. Antenna location is same, as is the vehicle setup numbers I used last year.
I did the roll calibration in the yard and took it out on the road for the rest of the calibration. It wanders back and forth, about 3" each way. Just a steady weaving. Last year, the steering motor was constantly "chattering" as it corrected the steering, and was always dead on. Now this.
I went into the menu tonight and changed the angle from 20 to 22, changed the on-line aggressiveness from 100 to 115%, and changed the other aggressiveness from 110 to 125%, but have not tried it with these numbers.
I did a search on here, and couldn't find an answer.
Am I on the right track, or is there something else I can do/try.
Thanks.
| |
|
Another EZ Steer "wandering" question
