Eastern VA. No such thing as too many Magnums. | I can't help you get it any quicker, but one thing to double check.... Early and late 7250s had different injection pumps and I'm not sure if they used the same injection lines or not. You might want to re-check the part numbers to make sure there weren't two different ones. I'm not saying there is, you may just want to check. Nothing worse than waiting for a special order part, only to get the wrong one. I know our 8940s are different than our 8950s too, even though they're both 8.3 T/A engines. I thought all 8.3s were practically the same too, but they aren't. I'm positive I have the line you need, if only you lived closer. I would brush it clean, and weld it with a mig welder if I was in a pinch... |