|
| Torn,
We finally got it to work the other day. It doesn't make alot of sense right now but we have to have liquid op mode, all the settings in the map right and the three point hitch needs to be DOWN. I can't find another way to get the tractor to go into "work" mode. I set work control to "on" but it won't spray unless the hitch symbol shows its down. Do you know of a way to change what controls the work mode? IE to a remote valve? It is a Puma Tractor so it has mid size tractor software. On another side note if I use the monitor reset button on the 700 it screws up my flow meter cal value. I have it set to 69 and if I use the key to shut it off it will stay there (more often than not anyway) If I use the reset button it will change it everytime to somewhere in the range of 261 +-. Took me a while to figure that one out. | |
|