|
KY | I bought a 2013 Kinze ASD Planter. I'm pulling this planter with a Magnum 7250. I added a G&L external hydraulic pump to the planter. This external pump has the capacity to operate 2 different motors.
I've added vSet from Precision Planting to this planter as well.
We are going to run the ASD Fan and the 2 Vacuum Fans that operate the vSets off the G&L external hydraulic pump.
The question is there is 3 hydraulic hoses that operate the ASD that are currently hooked to the tractor. The hoses are pressure, motor return, and case drain. The pressure and motor return hoses are plugged into my number #3 remote. The case drain hose is plugged into the bypass on the tractor. When I plug the pressure and motor return hoses into the G&L external hydraulic pump what do I do with the case drain hose? Shouldn't it be plugged into the G&L external hydraulic pump somewhere?
| |
|
Hydraulic hoses on Kinze ASD Planter
