|
Somewhereville, Earth | if it has a left hand reverser on the coloumn its a 12x12
if it has a big lever on the right of the seat, the gear lever, that you push sideways for range change its a 18x6
some of the early ones were 12x4, with 3 levers on the floor or 8x8
they are a tried and tested utility,
keep the grease up to the front axle pivot, all loader tractors fail there adventually
if it leaks round the PTO seal, that is common, not a hard fix
if its a 18x6 they sometimes break the spring in the tranny for the range shift, half hour job if you double jointed , 8 hours the hard way
good tractors, will do what ya want well
perkins motor is ok, front axle is ZF ? ain't it | |
|
Massey Ferguson 390 as a loader tractor?
