|
| Remove Hood and air breather on Cummin 903 to get muffler out under hood. Send it away to muffler shop to make new one. Put new one in and all back together. Start it up, Idle fine, Back up, No power, Push throttle to floor, No Go, No smoke. SCRACTH HEAD Hmmm WIERD. Take Muffler out, Cut it open, Find out the outlet was completely closed shut. Take back to muffler shop after many embarest apology from manager who fix it right while I wait. 6 hours on road since the beginning and fumming. Get all back together and start it up and back out but something not sound right. Then realize forgot take rag out intake from air breather. It got suck into intake valve. Find which cylinder cold, Take hood off again and take intake manifold off to get at rag stuff in real tight in intake valve. Put all back together, run perfect. Not happy with all the trouble they cause me with a closed up muffler. I ask the manager if one of his employee who build the muffler was smoking something. He could not give me an answer.
Edited by MPDT 2/23/2013 21:14
| |
|
What's the most ridiculous thing you've had to do to fix a piece of equipment
