|
Northern Kentucky | I hit all the grease points, lube all the chains, check the transmissions settings, check the seed tube sensors and take a brush through the seed tubes which will help clean out any critters and dust that may have collected on the sensor eye. Air pressure in the tires is critical, check that the hydraulics are functioning properly. As for the meters I would check the brushes and give them a few turns to make sure they aren't stuck. When installing the meters I have to put a bit of RTV around mine since the metal ring in the seeds box is in bad shape.
Edited by DVFarms 2/22/2013 04:33
| |
|
John Deere 7000 planter questions?
