|
| Hi, I would appreciate any help you guys might give me. I own the above heater, bought used last year, used it the the whole winter, had starting problems, but was able to deal with. This winter, it fired a couple of times, but after that nothing... Lots of what it looks like smoke (might be just the fuel spraying...) but no firing. Took it apart, checked the igniters gap (not sure what the gap should be, don't have a manual, don't even see an arc anymore) I measured 350 volts at the transformer, and 330 at the igniters, don't know if this voltage is high enough to spark an arc between the two igniters. Any ideas?
Thanks
Aldo | |
|
Knipco F-98 torpedo heater won't start!
