Posted 1/17/2013 21:47 (#2830870 - in reply to #2829664) Subject: Re: New Welding Table Pics.
Anamoose, ND
It is 36-1/2" tall. I looped a chain around the top of the frame and over the table top. Used a bottle jack pushing down to get the top plate to lay flat. I positioned the jack over two stringers at a time, cinch it down tight with the jack and weld it from the bottom. I welded from the bottom each edge and about two inches in the center. I will use the Bobcat to move it around.
New Welding Table Pics.
