Posted 1/1/2013 21:00 (#2792001 - in reply to #2791966) Subject: RE: Case IH 7120 3pt Hitch Jumping
Beresford SD
On ours when it does that I put the rocker switch in the down position and cycle the lever full up to full down about 10 times. Sometimes the position sensors need to get used a bit to work properly. One summer the 7130 went on round bale hauling duty about 20 hours, hitch got used steady and worked well for several years after that. Needs to do it again.
Case IH 7120 3pt Hitch Jumping
