|
nc IA | Well, I have one, was my first tractor 5 years ago and still have it now. Got just shy of 10K hours on it right now. Lower bearings were done before I got it around that 7K area. Since I've had it I've replaced the valves in the head when the head started leaking water and put new injectors in at that point. Otherwise - been minor stuff. king pins on the front axle, wheel bearings on the front, hyd leak on the pump and some lines... thats about it. Yes, splitting 4-5 and 5-6 would be perfect - but works good for me. I gave alot more for mine, but knew the history alot more as well back when I got it.
Edit - I have no fluid, and 4 x 440# rear wheel weights in the back, and run 12-18 on the front depending on the implament. The 3pt bracket I added this fall and makes a big diffrence pulling the ripper.
Edited by FFJR 12/28/2012 21:18
 (P1030871.JPG)
 (P1030844.JPG)
 (P1030857.JPG)
 (P1020635sm.jpg)
 (P1020601sm.jpg)
Attachments
----------------
 P1030871.JPG (94KB - 707 downloads)
P1030844.JPG (75KB - 639 downloads)
P1030857.JPG (78KB - 678 downloads)
P1020635sm.jpg (79KB - 710 downloads)
P1020601sm.jpg (58KB - 695 downloads)
| |
|
JD 4840 good and bands
