Bethany, MO | The minimum volume/minute is the one we use the most. The controller adjusts product flow to keep the rate/acre correct based on speed. If you slow down too much when crossing a ditch, the controller may reduce flow to the point that the low pressure creates a poor pattern. You can enter a minimum flow rate that will overapply, but hold the pressure while slowing down. It's in the attached manual on page 18 or 22 of 52 of the pdf. It needs to be refigured if you change tip sizes.
Edited by bowtieighth 12/28/2012 10:12
Attachments
----------------
 Raven 440 Manual.pdf (1978KB - 1283 downloads)
|
Raven 440 controller
