|
| Flexicoil had a insulation sleeve and the correct tube for the front point to prevent freezing. Make sure the tube comes out just past the opening if not you will have mud balls on the tips. Also get a nh3 detection kit so you can see exactly where the nh3 is placed so you can watch opener wear. If you don't want to remove the double shoot kit, I just cut a piece of angle iron at the correct angle so that it was vertical and wielded it on the back between the paired row and hose clamped the hose on. This allows you to still use some dry's if you need in a pinch. | |
|
Adding NH3 to Flexicoil airdrill?
