Slicker than a Yes album. | I thought there were two different cable adapters. One for CabCam and one for AgCam. Unless you have a switcher, you can only run one camera on the armrest. Up to three available on the 2630. (You're probably aware of that, though.)
The touchscreen GS3 CommandCenter is prewired with one video input to provide video capability. Operators can set the video to a mirror on/off. Mirror on will flip the view right for left, and mirror off will show left for right.
The operator has the ability to set a variety of triggers, including reverse, PTO, hitch, and SCV levers to activate the camera. In addition, the amount of time that video is activated can be set from the GS3 CommandCenter from 5 seconds to 60 seconds.
Camera (video observation system) is available through JD Parts and Agricultural and Industrial (A & I) Products:
JD Parts -
SWVCCS150B: Voyager camera with mounting bracket
SWTY26834: Adapter harness (will plug into the harness located on the back of the tractor behind the cab; under the back window)
CEC15: 15-ft extension harness
CEC50: 50-ft extension harness
A & I -
A-VS1C110: CabCAM camera
GS3C: Adapter harness (will plug into the harness located on the back of the tractor behind the cab; under the back window)
A-PVC20: 20-ft extension harness
A-PVC65: 65-ft extension harness
|
Deere 8xxxR video to armrest
