|
Wolcottville,Indiana | I had the switches go out of some 10 hp motors and the motor shop said it was a bad design and replaced them with no troble after that on some fairly new Baldors, I have 10 hp Baldors that were new in the early 80's with no problems, on the other hand when I put in an sir system with two 7 1/2 on it they drawed to many amps and tripped breakers, the Baldor VP at the NFMShow said they probaly came off the line with winding cut too short, Gave his card to the bin supplier who put the replaced motors and they worked good. but VP would not live up to his word and warranty the motors and the bin guy ate the new motors. | |
|
Problems with baldor electric motors.
