|
Ea. Washington | Generally the wings tend to ride out and the center goes in fine. It may look level when lifted out of the ground but the depth may not be set the same. Better check the depth settings, we always set the wings a little deeper because they are the first to ride out. I think you really need 2' spikes, not cultivator points but chisel points, If you have many acres to do look at weld on chrome alloy wear points from DIKO or R@H. Working depth can be 8-10 in if you can pull it. We always shoved a 10' cresent wrench handle in the ground and if you could still hang on to it that was good.
Edited by headerpuncher 10/3/2012 01:09
| |
|
Chisel plow not staying in the ground
