|
sw corner ia. | I rather liked the cable blade except for no tilt. Lot faster response, no hot hyd oil. tank by your arm. Blades were usually heavy enough you don't miss down pressure if the cutting bits were good.
You run oil rails long enough and they will squeal too, when you get some dry links.
8K had same c.i. 6cyl. motor as all the older 8's, but the block looks different to me, and sounds like more rpm, maybe 14 or 1500. Has real power when you let off the pedal too. Got some video of a K and I think a 46A cutting a dam for a road near home here a few years ago, should post it on youtube, except it would probably be so boring they would throw me out. | |
|
D8h info Dave Morgan?
