|
| Pressure; Will give you unadultered, constant flow and pressure (full system pressure) unless you are using the LS line.
Tank; Typically a "low restriction" return. These are typically filtered, but there is less restriction than going through a normal spool valve remote
LS: Load sense line will allow you to plumb into a circuit on an implement that has a LS system. The load sense line will stroke or destroke the pump based on demand through that circuit.
Case Drain, typically a very low restriction return specifically for plumbing into the case drain port of a hyd motor. | |
|
hydraulic theory - explain all the power beyond connections to me
