i have a 1250 planter that i pulled with a 7130,ran a pto pump that drove the seed drives and the vacumn fan,the tractor hydraulics took care of the lift/ lower and bulk fill.had to make sure the flow control for bulk fill was set pretty close to actual hydraulic need,or the lift/ lower was pretty slow.before i had the 1250,i took a 900 vert fold toolbar and put 1200 row units on it,the only hydraulics i was running were ,vac fan, three point,and lift assist.i controlled vac with the tractor flow control ,there again had to make sure i had just enough vac dialed in to do the job,otherwise other hydraulic functions were compromised.i don't think power beyond will gain you much.