|
Iowa | Default settings for that sprayer: PWM 12 volt/PWM Gain: 122/Gain: 600-800/PWM Standby: 50/Zero Flow Offset: 30. Increasing the gain makes it more aggressive and decreasing it makes it less aggressive. That is where I would start and it should calm down and hold rate after some adjusting. Also verify you have the right flow meter cal in the monitor. Raven flow meter cal needs to be divided by 10 before putting in Integra.
Edited by Twister 7/10/2012 17:59
| |
|
Erratic flow on Rogator RG1300 with Agleader Integra
