|
Soutwest Ks. | You didn't state your drop spacing, but if you are 5' spacing it won't hurt at all to go to 10' spacing. At 10' spacing you won't even need to run an impact nozzle.
An ordinary Senenger should work, but you may need to have the nozzle about 5' high. I have a system that I fought nozzles plugging too for quite some time and I finally went to a screen that fits up into the drop end where my nozzle body screws on. Has really helped so far. I was at 71/2' spacing and didn't want to go with a wider spacing with the drop package. | |
|
Plugged tips on a center pivot.
