|
Minnesota | Wheelbase of 100" seems short for an STX tractor. Measure from the center of the front axle to the center of the rear axle and input that for the wheelbase (not front axle to pivot point). Make sure that your antenna to fix axle distance is measured correctly (either forward or behind, Had one earlier this year that would not steer worth anything, cause was that they set the antenna offset to 60" behind the fixed axle when it should have been 60" forward). If you are in an area with big hills, you can try to lower the antenna height for the EZ-Steer to respond quicker to offline distance on side hills.
Other settings to look at are Angle per Turn (for weaving after engaged on the line) Aggressiveness (for how quickly it reacts to being offline), and Line Acquistion (for how fast the steering system tries to get to the line. | |
|
435 stx and ez steer
