AgTalk Home
AgTalk Home
Search Forums | Classifieds (99) | Skins | Language
You are logged in as a guest. ( logon | register )

Questions about hydraulic pump to run a dump trailer cylinder
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Gerald J.
Posted 5/21/2012 11:59 (#2391581 - in reply to #2391084)
Subject: Re: Questions about hydraulic pump to run a dump trailer cylinder



#2 will need a valve. You don't want to just put the PTO out of gear and let the box fall uncontrolled. And it will need a significant reservoir to hold the oil for a single acting cylinder. It will need a reservoir for a double acting cylinder too, though only a bit more than the volume of the lift cylinder piston rod. And the reservoir also acts as an oil cooler.

There is a flow control valve from Cross with a micrometer adjustment that includes a check valve so it flows free in one direction and restricted the other. Trouble is you'd like to let the trailer bed down fast but slow it near the bottom of the stroke and that's not a handy valve for that. Sold by Northern Tool, Surplus Center, Baum Hydraulics, and Force. The PTO pumps are available from the same sources and maybe TSC and Farm/Fleet stores.

I don't see a benefit to #1 except in fuel consumption where its beneficial to your fuel supplier, not you.

Gerald J.

Edited by Gerald J. 5/21/2012 12:02
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)