|
north west arkansas | I spray some helmquat and envive today and now I have a grease type residue in my tank, and I wasn't able to get it out. I was useing a 1 1/2 pint of helmquat, 3.5 oz of envive and a quart per hundred of 80/20, and 1 gal per thousand of interlock and was using well water. I did have about 30 to 50 gal of ru and envive mix to start with. Everything seemed to mix and spray fine but when I went to rinse my tank I notice it had a greenish brown grease type residue all over inside. I tried to wash it out and even put ammonium in it, and it helped but it is still bad. Any ideas what caused it and what can I do to get it clean? I sure hope the inside of my hoses aren't full of it also. The first picture is inside the tank and the second one is some of what sprayed out of my nozzles when I was trying to clean my tank. Sorry about the mixup on the pictures.
Edited by wayneNWAR 5/11/2012 01:18
| |
|
Gramoxone+envive= sprayer cleanup nightmare.
