|
| I got a Miller 4240, I installed an inductor as a kit from oxbo, I followed the instructions as per list, now I try the inductor it will not work. I do not have the electric rinse. I followed the instructions on the lid decal, 220gal in tank pump on and at least 50psi, all it does is bubble up makes a mess. I cut into the hose that comes from the valve that opens and blows back to the tank when booms are off, I installed a check valve in the hose from the inductor to the hose that blows back into the tank when booms are off and put it in so arrow on valve is allowing flow to tank. Anyone else have any issues? Thanks. | |
|
Help with inductor on 4240 Miller
