Near-north Ontario, French River | What monitor are you running? Simplest way to test the sensor is to just run a small wire with a rag wrapped around it up and down through the seed tube. If the sensor works all the other rows will beep, as those rows won't sense 'seed' in the tube. Go from row to row, running the rag through the tube,listen for beeps. As soon as you don't hear a beep you have found a bad sensor. There's the possibility the monitors settings have been scrambled and you may have to reprogram the monitor so that it 'finds' the sensor that's giving you fits. |
New to me Kinze monitor problem
