North West IA/western AZ | chief1403 - 4/13/2012 21:08
I think the ring from a box connector will work as a nut , bore hole and put ring on , mcmaster carr has the correct weather tight box connector
Id drill oversize hole in spot on pict 3 and use a grommet and come into box from spot in pict 4
You are thinking like me. The draw back is that all the wires in the box and the 2 connectors would need to come out to drill the hole in pic 4. not fun! Thanks to the great engineering by AP/GSI. |
electrical connection quandry
