Posted 4/7/2012 09:49 (#2324998 - in reply to #2324759) Subject: Re: Installing the tracer wire for a Corner Arm on Pivot Question?
There is a GPS option now on valley corners. No buried wires. Not sure of the cost difference vs buried wire. But if you ordered a new P corner installed, then the dealer should use his 3 guys and flag the wire. If he needs your help, I would bill him the same $/ hr as he charges for service calls. Why is your labor any cheaper than his. And yes the cable and flags is old school but you definitely know where your machine is going to end up. Good luck
Installing the tracer wire for a Corner Arm on Pivot Question?
