|
| Duo-cone seals work well, should come with instalation instructions, for lub do not put oil or grease on the rubber torix ring or ramp, use what the instructions say or metho, the rubber ring has to slide into place not roll into place. I always oil the ramps with the oil used in the product, dont wip it on just tip a bit on, if you have dirt on your finger that could leave a mark and effect the rams tapper from sealing. Have some good flat screw drivers hand, may need them to work the rubber in, even with that nice tool you built, dont have sharp screw drivers nice blunt ends.
Madsnake | |
|