|
Mid-East Nebraska | http://stellarsupport.deere.com/en_US/products/autotrac_controller/
Platform CompatibilityTech PublicationsThe following list shows platform compatibility for the AutoTrac Controller:
John Deere AutoTrac Controller
Deere John Deere AutoTrac Controller
Raven John Deere AutoTrac Controller
Reichhardt®
Platforms Platforms Platforms
Case™ MX™ Magnum™ 215, 245, 275, 305 AccuGuide™ Ready (MY2006 to MY2010)* CASE Steiger® 335, 385, 435, 485, 535 AccuGuide Ready with AutoSense Sensor (MY2008 to MY2010) Fendt Vario® 711, 712, 714, 716, 815, 817, 818, 820, 922, 924, 927, 930, 933, 936 non-guidance ready (COM 2 and COM 3 Series)
Case MX Magnum 335 AccuGuide Ready (MY2008 to MY2010)** CASE Steiger 335, 385, 435, 485, 535 AccuGuide Ready without AutoSense Sensor (MY2008 to MY2010) John Deere MFWD 6100, 6200, 6300, 6400, 6600, 6800, 6900 non-guidance ready (all years of production)
New Holland® TG 215, 245, 275, 305 IntelliSteer™ Ready (MY2006 to MY2010)* CASE Steiger 335, 385, 435, 485, 535
Non-AccuGuide Ready (MY2008 to MY2010) John Deere MFWD 6110, 6210, 6310, 6410, 6510, 6610, 6810, 6910 non-guidance ready (all years of production)
New Holland T8010, T8020, T8030, T8040, T8050 IntelliSteer (MY2008 to MY2010)* CASE Steiger QuadTrac® 335, 385, 435, 485, 535 AccuGuide Ready with AutoSense Sensor (MY2008 to MY2010)
* requires SSU software version 1.00W or newer
** requires SSU software version 1.10G or newer CASE Steiger QuadTrac 335, 385, 435, 485, 535 AccuGuide Ready without AutoSense Sensor (MY2008 to MY2010)
CASE Steiger QuadTrac 335, 385, 435, 485, 535
Non-AccuGuide Ready (MY2008 to MY2010)
Case IH Magnum/MX 210, 215, 230, 245, 255, 275, 285, 305, 335
Non-AccuGuide Ready with Standard Axles (MY2003 to MY2010)
Case IH Magnum/MX 210, 215, 230, 245, 255, 275, 285, 305, 335
Non-AccuGuide Ready with Class 5 Axles (MY2003 to MY2010)
John Deere MFWD and 2WD 7200,7400, 7600, 7700, 7800 non-guidance ready (all years of production)
John Deere MFWD and 2WD 7410, 7510, 7610, 7710, 7810 non-guidance ready (all years of production)
Displays Displays Displays
GS3 2630 (Version 3.4.1338 or newer) GS3 2630 (Version 3.4.1338 or newer) GS3 2630 (Version 3.4.1338 or newer)
GS2 2600 (Version 2.5.1103 or newer) GS2 1800 (Version 2.8.1205 or newer) GS2 1800 (Version 2.8.1205 or newer)
GS2 1800 (Version 2.3.175 or newer)
Receivers Receivers Receivers
StarFire iTC StarFire iTC StarFire iTC
StarFire 3000 StarFire 3000 StarFire 3000
Software Software Software
AutoTrac™ AutoTrac™ AutoTrac™
Documentation Documentation Documentation
iGuide™ iGuide™ iGuide™
John Deere Active Implement Guidance John Deere Active Implement Guidance John Deere Active Implement Guidance
GreenStar Rate Controller GreenStar Rate Controller GreenStar Rate Controller
John Deere Rate Controller Dry John Deere Rate Controller Dry John Deere Rate Controller Dry
Swath Control Swath Control Swath Control
John Deere Section Control John Deere Section Control John Deere Section Control
NOTE: John Deere AutoTrac Controller is not compatible with SuperSteer™ or AccuSteer™ front axles
AFS AccuGuide, Case, Magnum, MX, New Holland, QuadTrac, Steiger, and SuperSteer are U.S.-registered trademarks of CNH Global N.V. and its subsidiaries. Fendt Vario is a U.S.-registered trademark of AGCO Corporation.
| |
|
JD autosteer on CNH tractors
