|
![](/profile/get-photo.asp?memberid=152&type=profile&rnd=148) West Tennessee | We bought a 50' reefer to do the same thing. I've decided to use 2" PVC for a lot of the plumbing because it's a LOT cheaper. We'll use short pieces of flex for the final connections because of vibration or flexing. Our 3 1550gl tanks have 2" fittings so we're going to run a short piece of 2" flex into the 2" PVC and run each tank outlet to a 3" manifold and will have 2" valves there for each tank. In our trailer we won't be able to get to each individual tank so all the valves will be at the back where the pump is. We're also going to plumb a return to each tank the same way so we can run AMS through our inductor and recirculate back into each tank. 2" PVC is only 50 cents per foot so it's cheap to plumb with on the long runs. We're going to run into the pump with 3" and then reduce down to 2" going thru the inductor and out to the sprayer. We've been way to busy to make as much progress as I wanted. Wonder if we'll get it done before spraying season is over? | |
|