|
![](/profile/get-photo.asp?memberid=152&type=profile&rnd=148) West Tennessee | Check EVERYTHING on the left hand side including, but not limited to:
-Knifehead
-Plate that wobble box is mounted to and bolts(especially look for cracks).
-2 bolts that hold knifeback to wobble box plate
-tie rod end from A frame to mounting plate.
-A frame rear mounting bushings and frame. (any slack here will cause you a LOT of grief).
Lots of previous posts on here about this subject. We've run a 930F for about 7 years now in some very rough ground so we're pretty tough on it. | |
|