|
South Africa | We have a FMX (v6.00) with NavII (v5.20) installed on a JD 8 295R (2010 – 2011 series, serial # 1RW8295RJBP018220) with the John Deere JDAT ISO CAN Platform kit PN 54035-42.
We have purchased the unlock code from John Deere, PN BPF10363, but the local JD dealer cannot find a way to put it onto the tractor’s Command Centre. The JD dealer told us yesterday that the unlock is required for the 2012-series JD 8000 R series tractors only, and not for the 2010 – 2011 series.
When we switch on the FMX with autopilot after the tractor has been switched on, we get the following critical error code:
Vehicle F#177, AP – JD over CAN state machine failure to achieve Normal Automation Process, 4.000000, 0.000000, 0.000000
Please help.
Thanks | |
|
John Deere 8'R ISO CAN connection for Trimble Autopilot
