|
South Georgia | When we first started using chemicals in bulk quantities, (after I got tired of parking a truck close enough to use for power), I bolted a flap of hay baler belt to a convenient place at the rear of the 6700, bolted on with a 3" or so 3/8" stainless bolt, and bolted another stainless bolt lower in the baler belt that I ran a hot wire to. Fused, of course. Always close enough, always charged up, and always handy. Took all of a half hour to rig up.
Now I just suck product through a meter into the suction side of the transfer pump, right into the sprayer. I'm loaded just as fast as i can get the water on board.
Adrian | |
|
Power supply for chemical pumps?
