|
| Does it leak around the hydraulic tip or around the barrel in the housing? If it is just around the tip, the seals in the end of the barrel are easily replaced without disassembly.
If it is the barrels leaking, you have to knock the plug out of the SCV housing, remove the lever and pull out the barrels. The kit comes with a bunch of seals and backup rings and will try the patience of a saint getting all of them put in right. I have done 2 on my 4430 and they do get easier on the second one.
The pto is best done by draining the oil and removing the Gudgeon (housing) to replace the seal and o ring around the shaft. It is a lot easier than the SCV reseal, hardest part is draining the oil.
INDY | |
|
how to rebuild hyd.port on 4640
