|
Central Ky. | I've seen one made from a piece of PVC with light weight chains hanging down. He drilled some holes in the PVC, and ran a piece of wire through the chains to hang them on and supply electricity to them. He hung it with a couple pieces of high tensile run the length of the holding area with eye bolts through the PVC, one of the HT wires was made hot and supplied electricity to the chains. He tied a rope to the PVC and ran it through a hole he drilled in the parlor wall and pulled the rope to bring the girls in. He pushed it back by hand, Wasn't fancy, but it worked. | |
|
Crowd Gates
