|
South Central Nebraska | I have run AgLeader with Trimble for years using A-B lines set off the boundaries. Agleader's Insight would convert A_B line to match the equipment used.
(60' planter, or 130' sprayer, or 120'sprayer or 29.5' flex head) I did not have to sit on row or be on track O to figure it out. I could start in the middle of the field and have no odd rows when I get to that bountary. Now with the 2630 I have make an A-B line for each one. (Not very accurate to put 18' tracks
down 20' rows) I know I can shift line but what if I forget to put it back or can not remember what I used the last A-B line for. I am asking for a change in the
JD monitor to do that. What do you think about it. I had only about 5 a-b lines per field. (4 boundary lines and one to angle plant soybeans)
Of course RTK is a must to do this.
Any ideas on how to handle this in JD2630? | |
|
One A-B line multiple uses
