|
Canada | press and hold the Program key on the A-Post key pad for about 2 seconds, within ten seconds of turning the ignition key to the on position (it is not necessary to start the engine). The "CONFIG MENU" appears on the lower A-Post display screen. Using the Up and Down Arrow keys, highlight the "Instrument" option, and select it with the Program key. The "CONFIG ICU" menu appears. Select the "Controller Config" submenu. The "Select Controller" submenu appears. Select "Manual" within this submenu. Several configurable systems appear. Scroll through these systems using the Program key. When the Color Display option appears, use the Up or Down Arrow key to change the configuration from "No" to "Yes." Press the Program key once more to confirm your selection. Exit the CONFIG MENU by pressing the Reset button, or turning the ignition key off.
| |
|
A-Post Error after Pro700 install
