|
| The 700 display is also capable of setting up your implements as a "Hitch Implement" or an "EHR 1 Implement" (from the Toolbox > IMPL tab > Implement Type) both of which can be used to show the implement status without an actual switch. The "Hitch" selection works with the 3 point hitch height and the "EHR 1" works when the #1 remote is moved into the up detent and lower detent positions to change the status or logging.
If you use the implement status switch plug at the rear, the switch will need to close when the logging is wanted. | |
|
MX260 with pro700
