|
Mound Texas | First off I want to tell you that I am near illiterate when it comes to guidance systems.
We were using a pull behind Bestway sprayer with boom control and everything was fine
until the speed sensor went out that was mounted on the sprayer. We were told that gps
speed was far more accurate and easy to use. To accomplish that we had to buy one cable
from John Deere and another cable from Raven after plugging them together, one end plugs
into the display on the tractor and one plugs into the Raven monitor. This same cable setup
is also how we picked up groundspeed to run a Raven NH3 Accurate on a 2630 display.
My son knows more than I but if you need the part numbers we have them. Shoot me an email
if you need to. | |
|