|
South Central Nebraska | I just tried a field test on a raven iso controlling my home made dry spreader (airmax 180 controlled previously by raven 661). Everything looks good, (swath control, recording, RX changing application rate on raven page) however, it won't turn the belts. After driving around, I noticed that the ground speed on the raven home page is aways 0. I have ground speed on the other 2600 pages. I have no idea why the raven speed is 0. The new ISO plug i mounted on my tractor doen't have any extra plugs hanging off the iso harness. Where the iso harness joins the tractor harness there are a couple unused single wire plugs one marked "radar" and another marked "gps" as well as a two wire plug that says nothing. Do i need to hook one of these to something? Any help would be appreciated. To be honest for the first attempt I am closer that i thought i would be.
TIA | |
|
Raven ISO has no ground speed on JD 2600
