|
| Can you post the chart for the other frequency changes?
Here is the procedure to change the frequency manually, its really quite easy.
1. On Display, go to Main Menu >> StarFire Receiver >> Setup.
2. Uncheck the Use Default Frequency box.
3.Find the frequency shown on the display, if your old frequency was 1545.545, you will need to change to 1539.8725 (this covers most of north america, there is a chart that lists the other 5 regions if you need it.)
4. Return to receiver status page.
5. Verify StarFire corrections are being received.
| |
|