Posted 2/16/2012 04:24 (#2231638 - in reply to #2228121) Subject: Re: Cable to Calibrate NAV II on Accuguide Tractor
SA, Australia
for Accuguide tractors you'll only need 2, 3, and 5 in that list, hell even most trimble stuff only really needs 2, 3, 5 (Rx, Tx, Signal Ground) 10 and 11 (+12V and Gnd) for anything only needing serial output and power.
Or if you have a standard 252 Power/Data Cable (12-pin Deutsch on one end and DB9 serial plug + cigarette lighter on the other) then that'll work too.
Cable to Calibrate NAV II on Accuguide Tractor
