|
NE Kansas | I have an EZ Guide 500 guidance system and a JD 1770 planter with GSD4 (the basic brown box) monitor. The monitor needs a speed signal from EZ guide to know how fast to turn the seed shaft which is hydraulic. The Greenstar harness has a place for GPS input which we have tried but can't get the brown box to recognize it. We hooked up a Starfire receiver at the JD dealer to determine that everything was OK on the JD side and it worked. Any helpful info would be appreciated.
Thanks
Richard
Edited by RJMeyer 2/16/2012 08:51
| |
|
How do I get a speed signal from EZ Guide to JD GSD4 (brown box) planter monitor
